Bug#163091: marked as done (card services cause kernel oops with any pcmcia card on PPC arch)

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

Bug#163091: marked as done (card services cause kernel oops with any pcmcia card on PPC arch)

Debian Bug Tracking System
Your message dated Mon, 31 Jul 2006 19:03:19 +0200
with message-id <[hidden email]>
and subject line old 2.4 kernel bug
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)


Package: kernel-image-2.4.19-powerpc
Version:  2.4.19-2

Hi

card services cause kernel oops with any pcmcia card on a Powerbook
Titanium.

This will probable be an upstream problem. This happens on kernel 2.4.18
as well.

related packages:

ii  bluez-pcmcia-s 2.0-release-1  PCMCIA support files for BlueZ 2.0
Bluetooth
ii  pcmcia-cs      3.2.1-1        PCMCIA Card Services for Linux.


Dmesg puts out:


Memory BAT mapping: BAT2=256Mb, BAT3=128Mb, residual: 0Mb
Total memory = 384MB; using 2048kB for hash table (at c0400000)
Linux version 2.4.19-powerpc (root@voltaire) (gcc version 2.95.4
20011002 (Debian prerelease)) #1 Mon Sep 9 09:01:43 EDT 2002
Found Uninorth memory controller & host bridge, revision: 8
Found a Keylargo mac-io controller, rev: 3, mapped at 0xfdf7f000
Processor NAP mode on idle enabled.
PowerMac motherboard: PowerBook Titanium
Found UniNorth PCI host bridge at 0xf0000000. Firmware bus number: 0->0
Found UniNorth PCI host bridge at 0xf2000000. Firmware bus number: 0->1
Found UniNorth PCI host bridge at 0xf4000000. Firmware bus number: 0->0
PMU driver 2 initialized for Core99, firmware: 0c
On node 0 totalpages: 98304
zone(0): 98304 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/hda6 ro
PowerMac using OpenPIC irq controller
OpenPIC Version 1.2 (4 CPUs and 64 IRQ sources) at fc731000
OpenPIC timer frequency is 4.166666 MHz
GMT Delta read from XPRAM: 120 minutes, DST: on
time_init: decrementer frequency = 24.966218 MHz
Console: colour dummy device 80x25
Calibrating delay loop... 797.90 BogoMIPS
Memory: 383644k available (1668k kernel code, 1008k data, 164k init, 0k
highmem)
AGP special page: 0xd7fff000
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware
Fixup res 1 (101) of dev 00:10.0: 400 -> 802400
Can't get bus-range for /pci@f2000000/cardbus@1a
PCI->OF bus map:
0 -> 0
1 -> 0
6 -> 0
PCI:00:10.0: Resource 0: b4000000-b7ffffff (f=1208)
PCI:00:10.0: Resource 2: b0000000-b0003fff (f=200)
PCI:01:17.0: Resource 0: 80000000-8007ffff (f=200)
PCI:01:1a.0: Resource 0: a0000000-a0000fff (f=200)
PCI:06:0f.0: Resource 0: f5200000-f53fffff (f=200)
PCI:00:10.0: Resource 1: 00802400-008024ff (f=101)
PCI:01:18.0: Resource 0: a0002000-a0002fff (f=200)
PCI:01:19.0: Resource 0: a0001000-a0001fff (f=200)
PCI:06:0e.0: Resource 0: f5000000-f5000fff (f=200)
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Thermal assist unit using timers, shrink_timer: 200 jiffies
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
Journalled Block Device driver loaded
devfs: v1.12a (20020514) Richard Gooch ([hidden email])
devfs: boot_options: 0x0
PCI: Enabling device 00:10.0 (0086 -> 0087)
aty128fb: Rage Mobility M3 (AGP) [chip rev 0x0] 8M 128-bit SDR SGRAM
(1:1)
Console: switching to colour frame buffer device 144x48
Registered "ati" backlight controller, level: 15/15
fb0: ATY Rage128 frame buffer device on PCI
no framebuffer address found for
/pci@f0000000/ATY,RageM3p12Parent@10/ATY,RageM3p12B
input0: Macintosh mouse button emulation
pty: 256 Unix98 ptys configured
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
pmac_ide: enabling IDE bus ID 2
pmac_ide: enabling IDE bus ID 0
pmac_ide: enabling IDE bus ID 1
hda: TOSHIBA MK2016GAP, ATA DISK drive
hdc: MATSHITADVD-ROM SR-8187, ATAPI CD/DVD-ROM drive
ide0 at 0xdc897000-0xdc897007,0xdc897160 on irq 19
ide1 at 0xdc89b000-0xdc89b007,0xdc89b160 on irq 20
hda: Enabling Ultra DMA 4
ide_pmac: Set UDMA timing for mode 4, reg: 0x0c50038c
hda: 39070080 sectors (20004 MB), CHS=38760/16/63, UDMA(66)
hdc: Enabling MultiWord DMA 2
ide_pmac: MDMA, cycleTime: 120, accessTime: 90, recTime: 30
ide_pmac: Set MDMA timing for mode 2, reg: 0x00011d26
hdc: ATAPI 46X DVD-ROM drive, 512kB Cache, (U)DMA
Uniform CD-ROM driver Revision: 3.12
Partition check:
 /dev/ide/host0/bus0/target0/lun0: [mac] p1 p2 p3 p4 p5 p6 p7
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
eth0: GMAC at 00:03:93:00:c8:be, driver v1.5k4
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
SCSI subsystem driver Revision: 1.00
mesh: configured for synchronous 5 MB/s
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Macintosh non-volatile memory driver v1.0
apm_emu: APM Emulation 0.5 initialized.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Enabling device 01:18.0 (0000 -> 0002)
usb-ohci.c: USB OHCI at membase 0xd9832000, IRQ 27
usb-ohci.c: usb-01:18.0, Apple Computer Inc. KeyLargo USB
adb: starting probe task...
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Enabling device 01:19.0 (0000 -> 0002)
usb-ohci.c: USB OHCI at membase 0xd9834000, IRQ 28
usb-ohci.c: usb-01:19.0, Apple Computer Inc. KeyLargo USB (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver usb_mouse
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usb.c: registered new driver keyboard
usbkbd.c: :USB HID Boot Protocol keyboard driver
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f
ADB keyboard at 2, handler 1
Detected ADB keyboard, type ISO, swapping keys.
input1: ADB HID on ID 2:2.c4
input2: ADB HID on ID 7:7.1f
ADB mouse at 3, handler set to 4 (trackpad)
input3: ADB HID on ID 3:3.01
adb: finished probe task...
kjournald starting.  Commit interval 5 seconds
EXT3-fs: ide0(3,6): orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 147560
EXT3-fs: ide0(3,6): 1 orphan inode deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 164k init 8k chrp 36k prep
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Adding Swap: 1048568k swap-space (priority -1)
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,6), internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth0: PHY ID: 0x004061e3
eth0: Found Broadcom BCM5221 PHY
Linux Kernel Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
Intel PCIC probe: not found.
Yenta IRQ list 0000, PCI irq58
Socket status: 30000410
cs: memory probe 0x0c0000-0x0fffff:__ioremap(): phys addr c0000 is RAM
lr c0013208
Oops: kernel access of bad area, sig: 11
NIP: D98BF238 XER: 20000000 LR: D98BF214 SP: D5875660 REGS: d58755b0
TRAP: 0300    Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000000, DSISR: 40000000
TASK = d5874000[395] 'cardmgr' Last syscall: 54
last math 00000000 last altivec 00000000
GPR00: 00001000 D5875660 D5874000 00000000 D98CF815 00000000 00000002
D58756CA
GPR08: 00000000 00000000 08100000 00001000 24000028 10022898 00000000
00000000
GPR16: 00000000 00000000 00000000 D98BF468 00000000 00000000 D98BF654
D7308800
GPR24: 00040000 D58756CA 00000002 D7308844 D58756CA 00000002 D7308800
00000000
Call backtrace:
D98BF214 D98BF924 D98BFE84 D98BFC40 D98C1870 D98BF4B4 D98C1E84
D98C201C D98BF708 D98BF100 D98BF924 D98BFE84 D98BFC40 D98C1870
D98D2438 C004E270 C000619C 1001AB80 10001D1C 100035A0 10004D70
0FECAC50 00000000
BlueZ Core ver 2.1 Copyright (C) 2000,2001 Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky <[hidden email]>

etc.

Cheers

Mark

--
Ever wondered why Google's so fast & reliable?
They work "... with one of the world's largest Linux clusters"
 & "corporate Linux desktop".
(cf. http://www.google.com/jobs/openings.html)



dear bug subitters,

thanks for your bug report. Newest Debian unstable ships much newer
linux 2.6 kernels. So either your bug repot got solved or due to new
packageing is no longer relevant. therefor closing.
if you still experience the mentioned problem, don't hesitate to write
back and the report will be reopened.

you might want to test out the daily builds of the debian installer:
http://www.debian.org/devel/debian-installer/
the next beta 3 installer for Debian Etch is expected soon. :)

thanks for your feedback.

best regards

--
maks