Bug#926261: marked as done (linux-image-4.19.0-4-amd64: fan continiously spinning above 6900 RPM after resume on lenovo carbon x1 thinkpad with isa adapter)

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

Bug#926261: marked as done (linux-image-4.19.0-4-amd64: fan continiously spinning above 6900 RPM after resume on lenovo carbon x1 thinkpad with isa adapter)

Debian Bug Tracking System
Your message dated Wed, 03 Apr 2019 00:19:41 +0100
with message-id <[hidden email]>
and subject line Re: Bug#926261: linux-image-4.19.0-4-amd64: fan continiously spinning above 6900 RPM after resume on lenovo carbon x1 thinkpad with isa adapter
has caused the Debian Bug report #926261,
regarding linux-image-4.19.0-4-amd64: fan continiously spinning above 6900 RPM after resume on lenovo carbon x1 thinkpad with isa adapter
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [hidden email]
immediately.)


--
926261: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=926261
Debian Bug Tracking System
Contact [hidden email] with problems

Package: src:linux
Version: 4.19.28-2
Severity: normal

Dear Maintainer, Dear Debian,

After resume fan is continiously spinning above 6900 RPM. This happens after
resume the laptop, the problem accuring time to time. As a temporary workaround
I have to to three or four suspend/resume cycles and after it fan1 decrease the
speed.
sensors looks like the following output:

karol@pc:~$ sensors
iwlwifi-virtual-0
Adapter: Virtual device
temp1:        +30.0°C

pch_skylake-virtual-0
Adapter: Virtual device
temp1:        +34.5°C

acpitz-acpi-0
Adapter: ACPI interface
temp1:        +48.0°C  (crit = +128.0°C)

thinkpad-isa-0000
Adapter: ISA adapter
fan1:        6928 RPM

coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +34.0°C  (high = +100.0°C, crit = +100.0°C)
Core 0:        +32.0°C  (high = +100.0°C, crit = +100.0°C)
Core 1:        +33.0°C  (high = +100.0°C, crit = +100.0°C)

I think the problem exist from long time, I reported this on redhat mailing
list some time ago, but nothing happed:

https://bugzilla.kernel.org/show_bug.cgi?id=191181

this is similar and marked as resolved, but actually seems not.

Thank you and regards.



-- Package-specific info:
** Version:
Linux version 4.19.0-4-amd64 ([hidden email]) (gcc version 8.3.0 (Debian 8.3.0-2)) #1 SMP Debian 4.19.28-2 (2019-03-15)

** Command line:
BOOT_IMAGE=/vmlinuz-4.19.0-4-amd64 root=UUID=0004b958-b7a4-474a-a282-2328a441eb3a ro quiet

** Tainted: WOE (12800)
 * Taint on warning.
 * Out-of-tree module has been loaded.
 * Unsigned module has been loaded.

** Kernel log:
[35001.654200] IRQ 124: no longer affine to CPU3
[35001.655245] smpboot: CPU 3 is now offline
[35001.665321] ACPI: Low-level resume complete
[35001.665527] ACPI: EC: EC started
[35001.665530] PM: Restoring platform NVS memory
[35001.666492] Enabling non-boot CPUs ...
[35001.666618] x86: Booting SMP configuration:
[35001.666623] smpboot: Booting Node 0 Processor 1 APIC 0x2
[35001.669589]  cache: parent cpu1 should not be sleeping
[35001.670551] CPU1 is up
[35001.670636] smpboot: Booting Node 0 Processor 2 APIC 0x1
[35001.674083]  cache: parent cpu2 should not be sleeping
[35001.675832] CPU2 is up
[35001.675934] smpboot: Booting Node 0 Processor 3 APIC 0x3
[35001.678864]  cache: parent cpu3 should not be sleeping
[35001.679952] CPU3 is up
[35001.703079] ACPI: Waking up from system sleep state S3
[35001.733668] ACPI: EC: interrupt unblocked
[35001.794673] ACPI: EC: event unblocked
[35002.091134] usb 1-7: reset full-speed USB device number 4 using xhci_hcd
[35002.367071] usb 1-9: reset full-speed USB device number 6 using xhci_hcd
[35002.554916] psmouse serio1: synaptics: queried max coordinates: x [..5678], y [..4754]
[35002.590992] psmouse serio1: synaptics: queried min coordinates: x [1262..], y [1098..]
[35002.642791] usb 1-8: reset high-speed USB device number 5 using xhci_hcd
[35002.834691] restoring control 00000000-0000-0000-0000-000000000101/10/5
[35002.834699] restoring control 00000000-0000-0000-0000-000000000101/12/11
[35003.344095] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=2
[35004.773991] OOM killer enabled.
[35004.773995] Restarting tasks ... done.
[35004.786155] usb 1-2: USB disconnect, device number 19
[35004.786238] cdc_mbim 1-2:3.0 wwp0s20f0u2c3: unregister 'cdc_mbim' usb-0000:00:14.0-2, CDC MBIM
[35004.787782] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[35004.794783] Bluetooth: hci0: Device revision is 5
[35004.794786] Bluetooth: hci0: Secure boot is enabled
[35004.794787] Bluetooth: hci0: OTP lock is enabled
[35004.794788] Bluetooth: hci0: API lock is enabled
[35004.794789] Bluetooth: hci0: Debug lock is disabled
[35004.794790] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[35004.794795] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[35004.814176] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[35004.814193] option 1-2:3.2: device disconnected
[35004.827919] PM: suspend exit
[35005.055769] e1000e: enp0s31f6 NIC Link is Down
[35005.116434] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[35005.326260] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[35005.390476] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[35005.649795] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[35005.878157] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
[35005.919512] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[35005.995710] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[35006.345350] Bluetooth: hci0: Waiting for firmware download to complete
[35006.345759] Bluetooth: hci0: Firmware loaded in 1522657 usecs
[35006.345801] Bluetooth: hci0: Waiting for device to boot
[35006.356821] Bluetooth: hci0: Device booted in 10793 usecs
[35006.356830] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
[35006.360939] Bluetooth: hci0: Applying Intel DDC parameters completed
[35006.694108] usb 1-2: new high-speed USB device number 20 using xhci_hcd
[35006.844579] usb 1-2: New USB device found, idVendor=12d1, idProduct=15c1, bcdDevice= 1.02
[35006.844589] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[35006.844595] usb 1-2: Product: HUAWEI Mobile
[35006.844601] usb 1-2: Manufacturer: Huawei Technologies Co., Ltd.
[35006.844607] usb 1-2: SerialNumber: 0123456789ABCDEF
[35006.936479] cdc_ether 1-2:2.0 wwan0: register 'cdc_ether' at usb-0000:00:14.0-2, Mobile Broadband Network Device, 02:1e:10:1f:00:00
[35006.937554] option 1-2:2.2: GSM modem (1-port) converter detected
[35006.937934] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB0
[35006.938661] option 1-2:2.3: GSM modem (1-port) converter detected
[35006.938937] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB1
[35006.939492] option 1-2:2.4: GSM modem (1-port) converter detected
[35006.939752] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB2
[35006.940310] option 1-2:2.5: GSM modem (1-port) converter detected
[35006.940573] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB3
[35006.941147] option 1-2:2.6: GSM modem (1-port) converter detected
[35006.941399] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB4
[35007.093607] cdc_ether 1-2:2.0 wwp0s20f0u2c2: renamed from wwan0
[35007.618954] cdc_ether 1-2:2.0 wwp0s20f0u2c2: unregister 'cdc_ether' usb-0000:00:14.0-2, Mobile Broadband Network Device
[35007.650463] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[35007.650526] option 1-2:2.2: device disconnected
[35007.650767] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[35007.650816] option 1-2:2.3: device disconnected
[35007.651176] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[35007.651221] option 1-2:2.4: device disconnected
[35007.655927] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
[35007.656044] option 1-2:2.5: device disconnected
[35007.670244] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4
[35007.670367] option 1-2:2.6: device disconnected
[35007.906701] cdc_mbim 1-2:3.0: setting rx_max = 16384
[35007.907076] cdc_mbim 1-2:3.0: NDP will be placed at end of frame for this device.
[35007.907479] cdc_mbim 1-2:3.0: cdc-wdm1: USB WDM device
[35007.908531] cdc_mbim 1-2:3.0 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-2, CDC MBIM, 7e:39:88:2a:04:27
[35007.909714] option 1-2:3.2: GSM modem (1-port) converter detected
[35007.910112] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB0
[35007.930020] cdc_mbim 1-2:3.0 wwp0s20f0u2c3: renamed from wwan0
[35009.463367] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[35010.639782] wlp4s0: authenticate with a0:f3:c1:bc:90:53
[35010.649166] wlp4s0: send auth to a0:f3:c1:bc:90:53 (try 1/3)
[35010.661214] wlp4s0: authenticated
[35010.661907] wlp4s0: associate with a0:f3:c1:bc:90:53 (try 1/3)
[35010.666228] wlp4s0: RX AssocResp from a0:f3:c1:bc:90:53 (capab=0x431 status=0 aid=3)
[35010.672040] wlp4s0: associated
[35010.689977] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready

** Model information
sys_vendor: LENOVO
product_name: 20FC0038PB
product_version: ThinkPad X1 Carbon 4th
chassis_vendor: LENOVO
chassis_version: None
bios_vendor: LENOVO
bios_version: N1FET66W (1.40 )
board_vendor: LENOVO
board_name: 20FC0038PB
board_version: SDK0J40705 WIN

** Loaded modules:
nls_ascii
nls_cp437
vfat
fat
sg
sd_mod
uas
usb_storage
scsi_mod
hid_jabra
snd_usb_audio
snd_usbmidi_lib
snd_rawmidi
snd_seq_device
ctr
ccm
fuse
ipt_MASQUERADE
nf_conntrack_netlink
xfrm_user
xfrm_algo
nft_counter
nft_chain_nat_ipv4
nf_nat_ipv4
xt_addrtype
nft_compat
xt_conntrack
nf_nat
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
br_netfilter
bridge
stp
llc
nf_tables
nfnetlink
tun
rfcomm
cmac
pci_stub
vboxpci(OE)
vboxnetadp(OE)
vboxnetflt(OE)
cdc_mbim
cdc_wdm
cdc_ncm
snd_hda_codec_hdmi
snd_hda_codec_conexant
snd_hda_codec_generic
vboxdrv(OE)
cdc_ether
option
usb_wwan
usbnet
usbserial
mii
aufs(OE)
bnep
overlay
arc4
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
videobuf2_common
videodev
mei_wdt
media
btusb
btrtl
btbcm
btintel
wmi_bmof
snd_soc_skl
sparse_keymap
bluetooth
snd_soc_skl_ipc
snd_soc_sst_ipc
snd_soc_sst_dsp
snd_hda_ext_core
snd_soc_acpi_intel_match
snd_soc_acpi
drbg
iwlmvm
ansi_cprng
snd_soc_core
intel_rapl
mac80211
ecdh_generic
x86_pkg_temp_thermal
snd_compress
intel_powerclamp
i915
snd_hda_intel
kvm_intel
iwlwifi
snd_hda_codec
snd_hda_core
kvm
snd_hwdep
cfg80211
snd_pcm
drm_kms_helper
irqbypass
intel_cstate
intel_uncore
snd_timer
intel_rapl_perf
joydev
rtsx_pci_ms
evdev
serio_raw
hid_sensor_accel_3d
pcspkr
thinkpad_acpi
hid_sensor_trigger
nvram
snd
hid_sensor_iio_common
tpm_tis
drm
iTCO_wdt
memstick
iTCO_vendor_support
mei_me
soundcore
tpm_tis_core
industrialio_triggered_buffer
tpm
kfifo_buf
mei
industrialio
intel_pch_thermal
i2c_algo_bit
rng_core
rfkill
battery
ac
wmi
button
video
pcc_cpufreq
coretemp
parport_pc
sunrpc
ppdev
lp
parport
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
fscrypto
ecb
btrfs
zstd_decompress
zstd_compress
xxhash
algif_skcipher
af_alg
dm_crypt
dm_mod
raid10
raid456
async_raid6_recov
async_memcpy
async_pq
async_xor
async_tx
xor
hid_logitech_hidpp
hid_logitech_dj
usbhid
raid6_pq
libcrc32c
crc32c_generic
raid1
raid0
multipath
linear
hid_sensor_custom
md_mod
hid_sensor_hub
hid_generic
intel_ishtp_hid
hid
crct10dif_pclmul
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
pcbc
rtsx_pci_sdmmc
mmc_core
aesni_intel
aes_x86_64
xhci_pci
crypto_simd
cryptd
e1000e
glue_helper
xhci_hcd
psmouse
nvme
i2c_i801
usbcore
rtsx_pci
intel_ish_ipc
nvme_core
thermal
intel_ishtp
usb_common

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers [8086:1904] (rev 08)
        Subsystem: Lenovo Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers [17aa:2238]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: skl_uncore

00:02.0 VGA compatible controller [0300]: Intel Corporation Skylake GT2 [HD Graphics 520] [8086:1916] (rev 07) (prog-if 00 [VGA controller])
        Subsystem: Lenovo Skylake GT2 [HD Graphics 520] [17aa:2238]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 134
        Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=16M]
        Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
        Region 4: I/O ports at e000 [size=64]
        [virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
        Capabilities: <access denied>
        Kernel driver in use: i915
        Kernel modules: i915

00:08.0 System peripheral [0880]: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model [8086:1911]
        Subsystem: Lenovo Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model [17aa:2238]
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 255
        Region 0: Memory at f1348000 (64-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>

00:13.0 Non-VGA unclassified device [0000]: Intel Corporation Sunrise Point-LP Integrated Sensor Hub [8086:9d35] (rev 21)
        Subsystem: Lenovo Sunrise Point-LP Integrated Sensor Hub [17aa:2238]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at f1349000 (64-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: intel_ish_ipc
        Kernel modules: intel_ish_ipc

00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller [8086:9d2f] (rev 21) (prog-if 30 [XHCI])
        Subsystem: Lenovo Sunrise Point-LP USB 3.0 xHCI Controller [17aa:2238]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 124
        Region 0: Memory at f1320000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: <access denied>
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci

00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Thermal subsystem [8086:9d31] (rev 21)
        Subsystem: Lenovo Sunrise Point-LP Thermal subsystem [17aa:2238]
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin C routed to IRQ 18
        Region 0: Memory at f134a000 (64-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: intel_pch_thermal
        Kernel modules: intel_pch_thermal

00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-LP CSME HECI #1 [8086:9d3a] (rev 21)
        Subsystem: Lenovo Sunrise Point-LP CSME HECI [17aa:2238]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 123
        Region 0: Memory at f134b000 (64-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: mei_me
        Kernel modules: mei_me

00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #1 [8086:9d10] (rev f1) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        Memory behind bridge: f1200000-f12fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #3 [8086:9d12] (rev f1) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        Memory behind bridge: f1100000-f11fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 [8086:9d14] (rev f1) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
        Memory behind bridge: f1000000-f10fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-LP LPC Controller [8086:9d48] (rev 21)
        Subsystem: Lenovo Sunrise Point-LP LPC Controller [17aa:2238]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0

00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-LP PMC [8086:9d21] (rev 21)
        Subsystem: Lenovo Sunrise Point-LP PMC [17aa:2238]
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Region 0: Memory at f1344000 (32-bit, non-prefetchable) [size=16K]

00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-LP HD Audio [8086:9d70] (rev 21)
        Subsystem: Lenovo Sunrise Point-LP HD Audio [17aa:2238]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64
        Interrupt: pin A routed to IRQ 126
        Region 0: Memory at f1340000 (64-bit, non-prefetchable) [size=16K]
        Region 4: Memory at f1330000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel, snd_soc_skl

00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus [8086:9d23] (rev 21)
        Subsystem: Lenovo Sunrise Point-LP SMBus [17aa:2238]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at f134c000 (64-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at efa0 [size=32]
        Kernel driver in use: i801_smbus
        Kernel modules: i2c_i801

00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection I219-LM [8086:156f] (rev 21)
        Subsystem: Lenovo Ethernet Connection I219-LM [17aa:2233]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 135
        Region 0: Memory at f1300000 (32-bit, non-prefetchable) [size=128K]
        Capabilities: <access denied>
        Kernel driver in use: e1000e
        Kernel modules: e1000e

02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader [10ec:525a] (rev 01)
        Subsystem: Lenovo RTS525A PCI Express Card Reader [17aa:2238]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 122
        Region 1: Memory at f1200000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: rtsx_pci
        Kernel modules: rtsx_pci

04:00.0 Network controller [0280]: Intel Corporation Wireless 8260 [8086:24f3] (rev 3a)
        Subsystem: Intel Corporation Wireless 8260 [8086:0130]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 133
        Region 0: Memory at f1100000 (64-bit, non-prefetchable) [size=8K]
        Capabilities: <access denied>
        Kernel driver in use: iwlwifi
        Kernel modules: iwlwifi

05:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961 [144d:a804] (prog-if 02 [NVM Express])
        Subsystem: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961 [144d:a801]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        NUMA node: 0
        Region 0: Memory at f1000000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: nvme
        Kernel modules: nvme


** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 138a:0090 Validity Sensors, Inc. VFS7500 Touch Fingerprint Sensor
Bus 001 Device 005: ID 13d3:5248 IMC Networks
Bus 001 Device 004: ID 8087:0a2b Intel Corp.
Bus 001 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 020: ID 12d1:15c1 Huawei Technologies Co., Ltd. ME906s LTE M.2 Module
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: buster/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.19.0-4-amd64 (SMP w/4 CPU cores)
Kernel taint flags: TAINT_WARN, TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8), LANGUAGE=pl_PL.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-4.19.0-4-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.133
ii  kmod                                    26-1
ii  linux-base                              4.5

Versions of packages linux-image-4.19.0-4-amd64 recommends:
ii  apparmor             2.13.2-10
ii  firmware-linux-free  3.4
ii  irqbalance           1.5.0-3

Versions of packages linux-image-4.19.0-4-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  extlinux                3:6.04~git20190206.bf6db5b4+dfsg1-1
ii  grub-pc                 2.02+dfsg1-16
pn  linux-doc-4.19          <none>

Versions of packages linux-image-4.19.0-4-amd64 is related to:
pn  firmware-amd-graphics     <none>
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
pn  firmware-linux-nonfree    <none>
pn  firmware-misc-nonfree     <none>
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information

On Tue, 2019-04-02 at 20:20 +0200, KarolSzk wrote:

> Package: src:linux
> Version: 4.19.28-2
> Severity: normal
>
> Dear Maintainer, Dear Debian,
>
> After resume fan is continiously spinning above 6900 RPM. This happens after
> resume the laptop, the problem accuring time to time. As a temporary workaround
> I have to to three or four suspend/resume cycles and after it fan1 decrease the
> speed.
> sensors looks like the following output:
[...]

Linux doesn't control the fan, that's done by the system firmware.

Ben.

--
Ben Hutchings
Q.  Which is the greater problem in the world today,
    ignorance or apathy?
A.  I don't know and I couldn't care less.



signature.asc (849 bytes) Download Attachment